Fees for Services as of January 01, 2007

Residential

Residential Room by Room HVAC Load Calculations 
Res. Up to 1200 Ft. A/C Space $60.00  

 

Res. Over 1200 Ft. A/C Space $ .05 per sq ft  
HVAC Load Update $30.00
               
Residential Energy Code Calculations (with load calculations)*
UP To 1500 Sq Ft $25.00 4501-5000 Sq Ft $60.00
1501-2000 Sq Ft $30.00 5001-5500 Sq Ft $65.00
2001-2500 Sq Ft $35.00 5501-6000 Sq Ft $70.00
2501-3000 Sq Ft $40.00 6001-6500 Sq Ft $75.00
3001-3500 Sq Ft $45.00 6501-7000 Sq Ft $80.00
3501-4000 Sq Ft $50.00 7001-7500 Sq Ft $85.00
4001-4500 Sq Ft $55.00 7501-8000 Sq Ft $90.00
 
ADD $5.00 for each 500 sq ft or less.    
Stand Alone Residential Energy Code Calculations (without load calculations).
Online request form click here.*
UP To 1500 Sq Ft $85.00 4501-5000 Sq Ft $120.00
1501-2000 Sq Ft $90.00 5001-5500 Sq Ft $125.00
2001-2500 Sq Ft $95.00 5501-6000 Sq Ft $130.00
2501-3000 Sq Ft $100.00 6001-6500 Sq Ft $135.00
3001-3500 Sq Ft $105.00 6501-7000 Sq Ft $140.00
3501-4000 Sq Ft $110.00 7001-7500 Sq Ft $145.00
4001-4500 Sq Ft $115.00 7501-8000 Sq Ft $150.00
*NOTE: For multi-story homes ADD $15.00/story.   Residential Code update is $25.00.
Short Form (600-C) $25.00
Residential HVAC System Design (minimum charges...call for quote)
Per Square Foot $ .30
Each Duct System $25.00
Equipment Specifications 
(if needed) $25/System

Commercial

Commercial Energy Code Calculations 
By the Zone* First Zone $150.00   Additional Zones $50.00 each
*Zone:  A space or group of spaces within a building with any combination of heating, cooling, or lighting requirements sufficiently similar do that desired conditions can be maintained throughout by a single controlling device.  A zone can also be a non-conditioned space such as a manufacturing area, service and repair area, etc. inside a structure and has specific lighting for related work.
Commercial HVAC Load Calculations 
Per Room Charge $9.50 Minimum

$95.00

Commercial HVAC System Design 
Per Square Foot $  .25     
+ Each Duct System $25.00
+ Equipment Specifications  $25/System
 
   
Mid-Point (Smoke) Tests, Thermal Bypass Inspection,  Energy Ratings, Diagnostics and Consulting    Please call office for quote on these services
Mid-Point Smoke Tests done prior to drywall with all  registers sealed. Smoke is then introduced to ID leaks. Air conditioning contractor must be present to seal leaks in duct system
   
 
Thermal Bypass Inspection -inspection of insulation installation required for
EnergyStar Certification
Blower Door / HERS Testing
Class 1 Energy Ratings - LEED for certification in EnergyStar, FGBC and other green programs.
Diagnostics and Consulting 
Diagnostic test of air conditioning system return and supply CFM and duct system static pressure with report: $75.00 per hour, 3 hour minimum.
On site diagnostics and consulting: Call for quote on above.