Tampa Online Residential Services Request Form

CALCS PLUS

BUILDING PERFORMANCE CONSULTANTS

 

 

121 Triple Diamond Blvd   Unit 16

 

North Venice, FL  34275

 

www.calcs-plus.com

Phone (941) 488-1700                                                                                           FAX (941) 488-3834

This is an electronic form to request services, submit information that may not be on the plans, provide contact information, delivery options, and so forth.  Note: Incomplete Input Information may significantly delay processing.  If you wish to download the PDF form to mail or fax, you may download the form here: Calcs-Plus Supplemental Information Form

You may find the listing of our fees at: http://www.calcs-plus.com/fees_for_services.htm

Please provide the following contact information:

Name Work Phone
Organization Cell Phone
Street Address FAX
Address (cont.) Job Name
City E-mail
State City where built
Zip Code

County where built

Please Select Services Desired

Calculations (Calcs Plus Rep: Bill Eberle, Phone 352-540-0190):


Energy Code
Energy Gauge USA file for Federal Tax Credit

Would you like the forms transmitted electronically?

Yes No

Field Testing and Other Services  

Smoke Testing of AC Ductwork at Rough-In for Quality Control
End-Use Metering for High Utility Bill Issues
Blower Door Testing for Sealed Attic Quality Control
Duct Testing for Leak-Free Duct Credit in Florida Energy Code* 

*Should only be taken in conjunction with Smoke Testing listed above with remediation to reduce likelihood of failure. No guarantees that final testing alone will ensure that the leak-free credit will be obtained. Payment required prior to this service.

Method for customer to deliver plans:

  

(If emailing the plans is preferred, they can be emailed to Calcs-Plus at: info@calcs-plus.com)

Please Identify Orientation (Front Door Facing Direction):

N S E W NE SE SW NW

 

Exterior Wall Type:

Concrete Block
Wood Frame
Insulated Concrete Form (ICF)
Structural Insulated Panel System (SIPS)
Other (Describe Below)

R-Value for Exterior Walls

Adjacent Wall Types:

Concrete Block
Wood Frame
Insulated Concrete Form (ICF)
Structural Insulated Panel System (SIPS)
Other (Please describe Below)

R-Value for Adjacent Walls

 

Attic Type:

Sealed
Unconditioned

Attic Insulation R-Value

Attic Insulation Type:

Foam
Batt
Blown
Other (please describe below)

 

Floors (other than slab) R-Value

Window Pane Type:

Single
Double

Window Frame Material:

Are the windows NFRC Labeled?

Yes No

Window Tint:

Clear
Tint
Low-e (If checked, you MUST enter SHGC and U-Value below):

                Solar Heat Gain Coefficient (SHGC) 

                U-Value

 

 

Window Manufacturer.

Window Series.

 

Sliding Glass Door Type:

Single
Double

Sliding Glass Door Tint:

Clear
Tint
Low-e (If checked, you MUST enter SHGC and U-Value below):

Solar Heat Gain Coefficient (SHGC) 

          U-Value 

 

French Door Frame Material:


French Door Type:

Single
  Double

French Door Tint:

Clear
Tint
Low-e (If checked, you MUST enter SHGC and U-Value below):

Solar Heat Gain Coefficient (SHGC)  

U-Value

Heating, Cooling and Hot Water Sections only required for Energy Code and EnergyGauge USA Calculations

Choose one of the following AC options:

Split
Packaged

SEER Rating of AC equipment.

 

 

Heating Type:

Electric Strip
Heat Pump
Gas

If heat pump, HSPF.

 

If gas heating, AFUE.

 

 

Hot Water Type:

Electric
Gas
Solar
Instantaneous

Efficiency of Hot Water System.

 

Number of gallons capacity.

 

 

Important and "Other" information from above


Jon Klongerbo
Copyright © 2006 [Calcs-Plus]. All rights reserved.
Revised: November 18, 2008